XTC Honda Talon 6 Switch Power Control System

The wait is finally over, the 6 Switch Power Control System for the Honda Talon is now available from XTC Power Products. All PCS-64 6 switch power control systems come with 4 x 20 amp relay circuits and 2 x 10 amp direct wire circuits.

The PCS-64-HT includes an in-line outlet that connects directly to the Honda Talon, when using upgraded toggle switches, the bottA row of LEDs on the switches will light up with key power. A new fuse block with a blown fuse LED indicator is included along with a new grounding post. The 6 Switch Power Control System for the Honda Talon is the first PCS to be equipped with a bolt-on bracket.ting plate, install ittialways so fluid. The PCS-64-HT takes about an hour to install, 6 accessory points power the light bars, rock lights, heated seats, amplifiers and whatever the friends of the industry bring to the table.

PCS-64 6 Switch <a class=Power Control System” width=”1024″ height=”567″ srcset=”https://www.utvguide.net/wp-content/uploads/2020/02/pcs-64-ht-prop-1-1024×567.jpg 1024w, https://www.utvguide.net/wp-content/uploads/2020/02/pcs-64-ht-prop-1-300×166.jpg 300w, https://www.utvguide.net/wp-content/uploads/2020/02/pcs-64-ht-prop-1-768×426.jpg 768w, https://www.utvguide.net/wp-content/uploads/2020/02/pcs-64-ht-prop-1-1080×599.jpg 1080w, https://www.utvguide.net/wp-content/uploads/2020/02/pcs-64-ht-prop-1.jpg 1200w” sizes=”(max-width: 1024px) 100vw, 1024px”/>

PCS-64 6 Switch Power Control System

Reference PCS-64-HT-NS

  • Plug & Play Easy installation
  • For Honda Talon 2- and 4-seater 2019-2020
  • 6 Switch System – Switches Purchased Separately
  • 4 x 20 amp high power relay circuits and 2 x 10 amp direct switching circuits
  • Fuse block with each switch on individual fuse and blown fuse LED indicator
  • 8GA Power Cable Main Circuit Breaker 50 AMP to Battery
  • Barrier tape for clean integration
  • Bottom row lighting when upgraded switches are used
  • Made in the USA!
Rocker switches

Switches purchased separately

XTC Power Products leads the way in UTV cabling solutions. From our Plug & Play product line comes our PCS power control system. Our power control system was designed with the installer in mind. It dramatically reduces installation time and leaves a clean, organized wiring system for your vehicle and makes future troubleshooting easier.

The kit comes complete with everything needed for installation. All circuits / switch boxes are wired for lower row lighting. Power control systems have high current circuits on relays with diode protection that reduce voltage spikes due to field collapse, protecting LED lights and other sensitive accessories. Each circuit is protected by a fuse in a fuse block and comes with a power cable and a main circuit breaker at the battery level for overall circuit protection. XTC Power products are made in America. XTC connects you for fun!

Leave a Reply

Your email address will not be published.